high frequency chip inductors hf c05 *at 50mhz. **at 300mhz. ***at 500mhz. 1.0 1.2 1.5 1.8 2.2 2.7 3.3 3.9 4.7 5.6 8.2 10 12 15 18 22 27 33 39 47 56 68 82 100 *120 *150 *180 *220 10000 10000 8000 8000 7200 6200 5200 5000 4750 4100 3300 3000 2600 2500 2400 2000 1900 1600 1400 1300 1100 1050 900 770 1.30 550 520 500 0.10 0.10 0.10 0.10 0.10 0.10 0.12 0.14 0.16 0.18 0.24 0.26 0.28 0.32 0.35 0.40 0.45 0.55 0.60 0.70 0.75 0.85 1.00 1.20 650 1.70 1.90 2.00 600 600 600 600 600 600 600 600 600 600 600 600 600 600 600 500 500 400 400 400 400 400 300 300 300 250 250 250 nh nh nh nh nh nh hfc05-1n0s-rc hfc05-1n2s-rc HFC05-1N5S-RC hfc05-1n8s-rc hfc05-2n2s-rc hfc05-2n7s-rc hfc05-3n3k-rc hfc05-3n9k-rc hfc05-4n7k-rc hfc05-5n6k-rc hfc05-8n2k-rc hfc05-10nk-rc hfc05-12nk-rc hfc05-15nk-rc hfc05-18nk-rc hfc05-22nk-rc hfc05-27nk-rc hfc05-33nk-rc hfc05-39nk-rc hfc05-47nk-rc hfc05-56nk-rc hfc05-68nk-rc hfc05-82nk-rc hfc 05-100 nk-rc hfc 05-120 nk-rc hfc 05-150 nk-rc hfc 05-180 nk-rc hfc 05-220 nk-rc 8 8 8 8 8 10 10 10 10 10 10 12 12 12 12 12 12 12 12 12 12 12 12 12 8 8 8 8 0.3 0.3 0.3 0.3 0.3 0.3 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 physical packaging: 4000 pieces per 7 in ch idc max. (ma) allied part number inductance (nh) tolerance (%) srf (mhz) dcr max. ( ) q min rohs allied components interna tional 949-356-1780 www.a lli edcom pon en ts .com 0.0630.006 (1.600.15) 0.0310.006 (0.800.15) 0.0120.008 (0.300.20) 0.023 (0.60) 0.041 (1.04) 0.031 (0.79) 0.0310.006 (0.800.15) dimensions: inches (mm) 6.8 3750 0.22 600 hfc05-6n8k-rc 10 10 ***270 470 2.20 150 hfc 05-270 nk-rc 8 10 62 1050 0.85 400 hfc05-62nk-rc 12 10 @100mhz typical additional inductance values available upon request. all specifications subject to change without notice. features ? 0603 eia size for high board density applications. ? excellent q and srf characteristics ? cost effective monolithic construction for high frequency applications. electrical inductance range: 1.0nh to 390nh tolerance: use s for .3nh, j for 5%, k for 10% test frequency: inductance and q tested at 100mhz, 200mv with hp4191a inductance vs freq. characteristics measured on hp4191a q vs frequency characteristics measured on hp4191a srf measured with hp4291a & hp16197a mechanical test condition: pre heat: 150oc 1min. solder composition: solder temp: 245oc5oc (pb free) immersion time: 4 1 sec. no damage to part pre heat: 150oc. 1min. solder composition: sn/ag3.0/cu.0.5 (pb free) solder temp: 260oc5oc (pb free) immersion time: 10 1 sec. solderability: 90% terminal coverage resistance to solder heat: sn/ag3.0/cu.0.5 (pb free) test condition dcr measured with chen hwa ch502bc revised 06/11/2014 or hp4338b reel. storage temperature: under 25oc, humidty 40% - 65% operating temperature: -55oc-125oc impedance analyzer + hp16197a idc measured with hp4291-a + hp6632a *330 320 2.80 100 hfc 05-330 nk-rc 8 10 *390 300 3.00 100 hfc 05-390 nk-rc 8 10
|
